Workflow Builder
6.Select from the following Sheet Face options:
•[Mark both sides] to place crop marks on the front and back of sheets. This is the default selection when a duplex job is defined.
•[Mark front side only] to place crop marks on the front side of sheets. This is the default selection when a simplex job is defined.
•[Mark back side only] to place crop marks on the back of sheets.
7.Select from the following Interval options:
•[Mark every sheet] to apply crop marks to all sheets in the output.
•[Mark first sheet] to apply crop marks to the first sheet in the output
•[Mark last sheet] to apply crop marks to the last sheet in the output.
•[Mark every] to apply crop marks to every “n” sheet as defined by the user via the sheets spin box. Range: 1 to 500.
–[Starting with the first sheet] to start crop marks on the first sheet when selected, or on sheet(s) N when not selected.
8.Select from the following Size and Color options:
•[Crop mark length]: Defines the length of the crop mark from corner offset outward to the edge of the cell, sheet, or page.
•[Crop mark color]: Defines the color of the crop mark.
•[Crop mark bleed]: Defines the distance between the crop marks and the corner of the rectangle the crop marks identify. For example, if the bleed length is set to “0,” the horizontal and vertical crop mark lines that form a corner would meet. Larger values space the lines away from each other.
9.Select [OK] to accept the changes and close the window.
NOTE: If printing, ensure that the sides imaged and the paper stock options in the print component are consistent with the options specified here.
FreeFlow Process Manager Operator and Administrator Guide |
