Xerox 701P47169 manual About Job types

Workflow Builder

About Job types

The following job types are available via the Imposition Settings dialog:

•Standard: The pages are printed in a sequential order with one page on one side of a sheet of defined paper stock. There is one Standard job type, for which you can specify the image orientation and sides imaged.

•Signature: Two separate pages are printed side-by-side on one side of a sheet of paper. All Signature documents are 2- sided. The pages of the document are sequenced when printed to produce output that can be folded to create a booklet type of document. There are three signature job types, each characterized by the fold (binding edge) of the document:

–Signature Booklet: Portrait, fold (binding edge) is parallel to short edge of the stock

–Signature Calendar: Head to Toe orientation, fold (binding edge) is parallel to short edge of the stock

–Signature Pamphlet: Portrait orientation, fold (binding edge) is parallel to the long edge of the stock

•N-up:The pages are printed in sequential order with each page of the document appearing a specified number of times

(n) on the same side of a sheet of paper. (This is also known as multiple imposition or tiling.) Each copy of the page is called a cell. There are ten n-up job types:

–2 Up: Each page is imaged twice on one side of a sheet of paper.

–2 Up Flip Left: Each page is imaged twice on one side of a sheet of paper with the left of the two imaged pages flipped 180 degrees to appear upside down.

–2 Up Flip Right: Each page is imaged twice on one side of a sheet of paper with the right of the two imaged pages flipped 180 degrees to appear upside down.

2-96 FreeFlow Process Manager Operator and Administrator Guide