Workflow Builder

Adding a Barcode

The Barcode node allows you to add a variety of barcodes to your workflows. You can specify the barcode type, font, placement, alignment, rotation, frequency, and size.

You can specify additional features for some bar code types. For example:

Two-digit or 5-digit supplements.The supplement is a second barcode, separate from the primary barcode and positioned to its right.

A checksum, for barcode verification, which may be either optional or mandatory.

Start and stop characters that bracket the bar code content.

A fixed first digit, which you can specify it from a range.

See also:

To configure Barcode settings

To configure the barcode readable text

To configure barcode data

To add or modify text or a data field

To manage barcode data

To configure Barcode settings

NOTE: View the dynamic effect of your selections in the Preview window at the bottom of this dialog, or click the [Preview >>] button to preview the barcode placement in the document. For more information about the Preview option, see Previewing job level edits.

1.To open the Add Barcode dialog, double-click the [Barcode] process in a workflow.

2.In the Barcode tab, specify the barcode symbology from the drop box.

3.In the Options area, select from the following:

NOTE: Options vary depending on the selected symbology.

[Include check digits] to enable barcode verification.

[Include start character] to include a start character in the barcode.

[Include stop character] to include a stop character in the barcode.

2-74

FreeFlow Process Manager Operator and Administrator Guide

Page 126
Image 126
Xerox 701P47169 manual Adding a Barcode, To configure Barcode settings