Workflow Builder
15.To enable cell clustering, mark the check box for [Cluster imposed cells]. For more information about clustering, see Guidelines for Cell Clustering.
16.Select from the following to specify the space or “gutter” between the clustered cells:
•[Gutter width] To specify a single horizontal gutter value.
•[Gutter height] To specify a single vertical gutter value.
Gutters are applied between the cells and do not affect border gutters.
NOTE: With the Autofit check box marked and gutter values specified, the Autofit cell size is reduced by half the gutter in both the vertical and horizontal dimension. Any page content that exists outside of the selected PDF box bleeds into (half) the gutter area between imposed cells.
17.Select [Autofit] to scale the image to fit inside the cell.
18.Select from the following signature options:
•[Signature Shift] to specify an incrementing offset for incoming PDF pages on the output paper stock for Book, Pamphlet, and Calendar job styles.
•[Single signature] when cleared, to specify the number of sheets per signature segment; when selected, to place all sheets in one signature.
•[Sheets per signature] to enter the number of sheets that will comprise a single segment of a
•[Fill last segment] to fill the document with blank sheets to ensure the last segment in the job is filled to the value specified in Sheets per signature. Available when Single signature checkbox is not selected.
NOTE: The number of sheets in the final signature may not equal the requested value when Sheets per signature does not divide evenly into the number of sheets.
19.Select [Always use these settings] to prevent users from modifying the settings or to override any similar settings in an incoming JDF job ticket or an RDO file. The settings will appear in the Submission Client controls, but will be grayed out and unchangeable.
FreeFlow Process Manager Operator and Administrator Guide |
