Xerox 701P47169 manual Setting up or modifying an image watermark

Workflow Builder

Setting up or modifying an image watermark

Image watermarks can be transparent or opaque, scaled, rotated, variably positioned from the document edge and can appear either underneath or on top of the page content. Colorization is not supported.

To set up or modify an image watermark

1.Double-click the Watermarks step in a workflow.

2.Select one of the following:

•Select [New], and then select [Image Watermark] to set up a new image watermark.

•Select a watermark from the list, and then select [Modify] to change an existing image watermark.

3.Enter a file path or select [Browse] to locate a TIFF, JPEG, BMP, or PDF image file.

NOTE 1: The selected image must reside on a local drive.

NOTE 2: Only page 1 of the PDF is selected.

a.In the Browse for watermark image file dialog, select a file.

b.Select [Open]. The dialog closes and the path and file name display in the Watermark filename text box.

4.Select a percentage from 1 to 200 to scale the image.

5.Select or type the horizontal position from the PDF document box: From left, Center, or From right.

6.Select or type the vertical position from the PDF document box: From top, Center, or From bottom

7.Select the position relative to Crop Box, Media Box, Bleed Box, Trim Box or Art Box.

8.Select the desired degree of rotation, from 0-359 degrees. The icon changes to reflect the selected rotation.

9.Select a transparency from 0-100. The greater the transparency level, the less opaque the watermark.

2-68 FreeFlow Process Manager Operator and Administrator Guide