Workflow Builder
6.After the job passes successfully through the Imposition node, the user opens the Copy Count dialog at the second Review. They see:
•Quantity (original document): 20
•Quantity (imposed document): 10
7.At the second Review the user looks at the Print task setting. They see: Quantity: 10
8.The job prints 10 actual copies of the imposed document.
Example 4: Original quantity is 20 with
1.The user sets the Copy Count Divisor switch to On.
2.User creates a workflow with the following nodes:
•Imposition (2up; Always use these settings is set)
•Review
•Imposition (2up; Always use these settings is set)
•Review
•Print (Always use these settings is not set)
3.User submits a job with an XPIF ticket: Copies=20
4.After successful execution of the first Imposition, at the first Review, the user opens the Copy Count Dialog. The user sees:
•Quantity (original document): 20
•Quantity (imposed document): 10
5.The User modifies the Quantity (imposed document) value in the Copy Count Dialog to 12:
•Quantity (original document): 20
•Quantity (imposed document): 12
6.After successful execution of the second Imposition, at the second Review, the user opens the Copy Count Dialog. They see: Quantity (original document): 20
7.Quantity (imposed document): 6. Since the user modified this value at the first Review, the second Imposition node takes the modified value and applies the copy count divisor logic.
8.The job prints 6 actual copies of the imposed document.
FreeFlow Process Manager Operator and Administrator Guide |
