Xerox 701P47169 manual To manage barcode data

Workflow Builder

box.

6.Select [Add]. Your selections display in the lower area of the dialog.

7.If adding, select [Done]; if modifying, select [OK].

See also:

To manage barcode data

To manage barcode data

1.To open the Add Barcode dialog, double-click the [Barcode] process in a workflow.

2.In the Data tab dialog, review your selections in the window. As necessary, select from the following:

•To add text or data, select [Add]. Data is concatenated to form one string of data. Refer to To add or modify text or a data field.

•To modify text or data, select the text or data and then select [Modify]. Refer to To add or modify text or a data field.

•To remove text or data, select the desired text or data, and then select [Delete].

•To move the selected text or data up or down in the list, select [Move Up] or [Move Down].

3.In the “Variable data options” area, select or type the desired Sheets per signature, from 1 to 999. This value is used if the Signature Number and Total Signatures variables are selected.

4.In the “When sheets are part of the barcode data” area, select from the following to specify a count direction to be used with the SheetNumber, SignatureNumber, and SheetInSignature variables. A single count direction is applied to all three variables.

•[Increments, starting with the first sheet number (ascending)] (1 to N)

•[Decrements, starting with the last sheet number (descending)] (N to1)

NOTE: If bar code frequency is set to Even Pages or Odd Pages, the Bar Codes node treats the document as duplex, and the Sheet Number variable increments for every bar code (i.e., not for every PDF page), while the TotalSheets variable is half the number of PDF pages. The document is also treated as duplex if any of the Signature variables are used.

2-80 FreeFlow Process Manager Operator and Administrator Guide