Xerox 701P47169 manual To enable the Copy Count Divisor

Workflow Builder

To enable the Copy Count Divisor

You can enable the system to adjust the copy count to maintain the original quantity intent for workflows that contain multiple-up impositions. The value is changed to output the original quantity of the original document given that the imposition node has changed the PDF document to contain multiple instances of the original document.

In the Job Manager Copy Count and the Print node Job Setup dialogs, the quantity value is modified when you:

•Process the job through a Xerox imposition node (not PREPS) that is multi-up repeated.

•Enable the Copy Count Divisor switch.

•Submit a job with a job ticket quantity intent.

•Use Print nodes that do not have “Always use these settings” selected.

Example: If the original document is 1 page, the original quantity is 100 copies, and the imposition is 4-up repeated, then the post imposition copy count quantity will be 25, since each copy of the imposed document now contains 4 copies of the original document.

If there is a JDF Export node in the workflow, the JDF ticket created through the JDF export node does not include the modified copy count.

See also:

Copy Count Divisor examples

1.In Workflow Builder, select [Options: Processes] to display the Processes dialog.

2.Select the Impose process, then select [Settings] to open the Impose Process Settings dialog.

3.Mark the check box for [Imposition affects copy count].

4.As appropriate, select or deselect the check box to place the process online.

5.Select [OK] to accept the changes and close the Process Settings for [Process] dialog.

6.Close the Processes dialog.

FreeFlow Process Manager Operator and Administrator Guide 2-141