
Workflow Builder
Stock dimensions based on reference box The stock dimensions are based on the resulting cell layout of the job type and the size of the configured imposition reference box (PDF box) on the first page of the input document only. If the reference box is consistent size throughout the input document, unusual clipping or unexpected
Regional prioritization If you prioritize the automatic selection to one of the standard named stock configurations, you may further constrain the standard stock type used by regionality.
For each of the options, If no stock among the set is large enough to encompass the layout area, a Custom type is created.
–If a standard stock type is identified, orientation is dynamically configured to choose a stock orientation that minimizes
–If the subsequent layout exceeds the size of an identifiable standard stock type, a Custom stock type that encompasses the layout area is created.
–If you choose not to prioritize among standard stock types, a stock type that wholly encompasses the layout area is created. This might equate dimensionally to a standard named stock type.
Maximum size The maximum size for an automatic stock is 60” in either direction.
Both Maximum
Maximum N-Up limitations
•Cannot be used to automatically configure the printed stock.
•No support for Media Boxes.
•Bleed, Trim and Art boxes must be smaller than or equal to the defined Crop box.
•Defined boxes in the input document are not carried over into the imposed output document.
FreeFlow Process Manager Operator and Administrator Guide |