Mitsubishi Electronics CP700E Connection with external equipment, Connection with Monitors

4. Connection with external equipment

The functions of this unit can be set with the menu screens displayed on the monitor.

1 Connection with Monitors Pages 14 - 16

Explains how to connect with a monitor.

Explains the setting of sync. polarity.

,When the sync. polarity of a monitor differs from the initial setting of this unit, the image on the monitor may not be displayed correctly. In this case, set the sync. polarity according to the monitor.

When the image is displayed on the monitor correctly, the setting is not required.

2 Connection with VIDEO/S-VIDEO (Y/C separate VIDEO) signal equipment Page 17

Explains how to connect with a video signal equipment.

Explains how to connect with a S-video signal equipment.

3 Connection with RGB Analog Signal equipment Page 18

Explains how to connect with a RGB analog signal equipment.

4 Connection with RS-232C equipment Pages 19 - 21

Explains how to connect with a RS-232C equipment.

1Connection with Monitors

Connect this unit with a monitor to check the images to be printed and the images stored in memory.

The following example shows the connection with a video signal, a S-video signal and RGB analog signal equipment. Connect with the necessary signal equipment.

When connecting the unit with a monitor, make sure to set the power of each equipment to “OFF” .

To S-VIDEO OUT terminal
S-VIDEO ( )	To S-VIDEO IN terminal
	To VIDEO IN terminal

S-VIDEO

			To VIDEO OUT termi nal
			VIDEO (		)
				1	2
		RS-232C		REMOTE
VIDEO
					AC LINE
				IMPEDANCE
R	G/G+SYNC	B	H+V-SYNC	RGB
IN				75Ω
				HIGH
				SYNC.
OUT				75Ω
R	G/G+SYNC	B	H+V-SYNC	HIGH
R	G/G+SYNC.	B	H+V-SYNC.	VCP				Monitor
					R	G/G+SYNC.	B	H+V-SYNC.
					To RGB Analog IN
					terminals

To RGB Analog OUT

terminals ( )

14