Mitsubishi Electronics CP700E operation manual Precautions before printing, After printing

3. Preparations before operation

1Print paper and ink sheet

Attention}

,The following types of paper sheet sets are available.

Use our original consumable. We can not guarantee the failure of using others.

Ink sheet
Product name	Ink sheet size	Number of prints	Usage
PK700S	S size	200 sheets	For 3 color use
PK700L	L size	130 sheets	For 3 color use
Print-paper
Product name	Print size	Number of prints	Usage
CK700	S / L size	S size:200 sheets	For 3 color use
		L size:130 sheets
K65H	S / L size	S size:200 sheets	For	thermal printing
		L size:125 sheets
K65HM	S / L size	S size:200 sheets	For	thermal printing
		L size:125 sheets
Print-paper/ Ink sheet
Product name	Print size	Number of prints	Usage
CK700S4P	S size	110 sheets	For 3 color use (Surface-coated paper)
CK700L4P	L size	75 sheets	For 3 color use (Surface-coated paper)
CK700SC	S size	200 sheets	For 3 color use (sticker)
CK700LC	L size	130 sheets	For 3 color use (sticker)
CK710SPC	S size	200 sheets	For	3 color use (16-division pre-cut sticker)
CK710LPC	L size	130 sheets	For	3 color use (16-division pre-cut sticker)
Ink sheet /Ink cassette
Product name	Print size	Number of prints	Usage
PKC700S	S size	200 sheets	For 3 color use
PKC700L	L size	130 sheets	For 3 color use

Note:

,Please observe the following precautions.

Precautions before printing

0Fingerprints or dust on the paper’s printing surface may degrade print quality and cause paper jams. Immediately after the paper is replaced, 2-3 images may be printed with a blank part due to hand’s dust or oil.

0When print paper is rapidly transferred from a cool place to a hot place, vapor or dew is generated on the paper’s surface causing paper jams or degraded print quality. Leave the print paper in the room to stabilize its temperature before using it.

0When print paper and ink sheet runs out during printing, the printing operation stops and the error message “PAPER EMPTY” or “SHEET EMPTY” is displayed. Replace the print paper and ink sheet with a new one.

0If paper feeding is repeated while installing the print paper, the indicated number of prints may not be done.

After printing

0When the printed paper is touched by a wet hand, the print may be discolored.

0If the paper absorbs non-volatile organic solvents ( alcohol, ester, ketone etc.) the print may be discolored.

0Discoloration of prints will be accelerated if the print paper comes into contact with soft vinyl chloride such as transparent tape etc.

Storage

0Store the prints in a place with low humidity free from direct sunlight.

0Leaving the print paper in contact with PVC-based materials causes color of print paper to come off and to be stained.

0Avoid direct sunlight and placing the printed paper near a heater.

Note:

0If the print paper is installed for two or more days, the prints may be rolled after printing. There is no cause for alarm because the print paper is rolled on the inside of the printing unit.

9