Mitsubishi Electronics CP700E operation manual Print Print setting, Nml, Deep, Echo

7. Setting the functions (Main menu)

SEPARATE

Function Switching the white frame

Separate the each image in multi-image print with white frame

ON	White frame print
OFF	Normal print

• When “MULTI” is set to “ON”, this function is displayed.

4 PRINT Print setting 1

M O D E

Function Selecting the paper size

Selecting the paper size depending on the installed the ink sheet.

S	S-size ink-sheet ( model: PK700S)
L	L-size ink-sheet ( model: PK700L)

•When installing L-size ink sheet or monochrome ink sheet and selecting “S” , the image can be printed on S-size. Also the number of prints is as follows.

	Print	S	L
Ink	mode
sheet
	S	S size print	S size print
		(200 sheet)	(200 sheet)
	L	S size print	L size print
		(125 sheet)	(125 sheet)

• When S size ink sheet is set, S-size printing is made even if “L” is selected in print mode.

GRAD (Gradation )

Function Change the gamma curve of the image

Selecting the gamma curve from 3 types

NML	Normal
DEEP	Deep
ECHO	The gamma curve is set according to medical equipment.

,If changing the setting value of gamma in ECHO, the value is able to change in “ECHO GAMMA ADJ” on “MEMORY SW MENU” → “PRINT SETTING” menu.

The setting value in the “ECHO GAMMA ADJ” on the print setting menu is applied to “ECHO” . Refer to page 63.

APT

Function Adjusting image outline.

This function is to control aperture and to reinforce or soften the contour.

SOFT [ S ]	Soften the contour
NML [ N ]	Do not perform APT
HARD [ H1 ]	Reinforce the contour
HARD [ H2 ]	More reinforce the contour

49