Mitsubishi Electronics CP700E operation manual ADJ Signal setting display

7. Setting the functions (Memory SW menu)

CLEAR KEY ( Memory and Clear )

Function	Setting the CLEAR button function on the remote control.
	ONE ........ Pressing the CLEAR button on the remote control, the
	memorized image being selected is cleared.
	ALL ......... Pressing the CLEAR button on the remote control, all of the stored
	memorized images are cleared.
3 SIGNAL	ADJ Signal setting display
IN SYNC

Function Selecting the level of input sync.signal.

0.3 V	Composite Sync. of 0.3Vp-p level
TTL. SOG	Composite Sync. of TTL level or Sync. On. G

Set the function according to inputting signal.

OUT SYNC

Function Selecting the level of output Composite Sync. signal of RGB signal.

0.3V	0.3 Vp-p
TTL	TTL level

Set the function according to connecting monitor.

SYNC

Function Select the polarity of output H+V Sync. of RGB signal.

POSI	Positive polarity
NEGA	Negative polarity

Set the polarity according to the signal of the connecting device.

Refer to the manual of connecting device.

RGB SOG OUT

Function Select the sync. signal of RGB analog output terminal.

OFF	Composite Sync. signal output
ON	Sync. On.Green + Composite Sync. signal output

This is the function to switch between sending and not sending Sync. On Green signal on the output

signal. When set to “ON”, Sync. On Green and Composite Sync. signals are output. When set to “OFF”, only Composite Sync. signal is output.

Set the function according to connecting monitor.

61