7. Setting the functions (Memory SW menu)
MARGIN CUT |
|
|
Function | Cut the print paper so that the upper margin is small. |
|
| ON .......... Small margin |
|
| OFF ........ Behind the margin |
|
|
| Margin cut |
| ON | OFF |
| This function is convenient when putting the print on prints on records or | |
| orchiving. This feature also saves paper. |
|
V POSITION |
|
|
Function | Adjusting the vertical position of printing image. |
|
| Setting area - 40 to +40 ( Change each 2 lines) |
|
When
V POSITION function is to adjust the position for UP and DOWN direction of the image in memory and to print the image in the normal cutting position. This function is available only when printing
ECHO GAMMA ADJ
Function 
Change the gamma value of “ECHO” for medical equipment.
The gamma curve is set for medical equipment in MAIN MENU → 4.PRINT GRAD : ECHO . When the set gamma curve cannot be applied, this function is able to set according to connecting device. The set value is applied to the value of ECHO.
The gamma characteristic of printed image can be changed by inputting the value of a, b and c on the gamma curve.
a | (cordinates of the x1 point, | changed value y1)...... dark part of the image gets |
|
|
|
|
|
|
|
|
|
|
| ||
| y1 | → + : brighter |
|
|
|
|
|
|
|
|
|
|
|
| |
b | (cordinates of the x2 point, | changed value y2 )...... the whole image get | a ( cordinates of the x1value, changed value y1) | ||||||||||||
| y2 → + : brighter |
|
|
|
|
|
|
|
|
|
|
| |||
c | (cordinates of the x3 point, | changed value y3 )...bright part of the image gets |
|
|
|
|
| y3 | c:( |
| x3,y3 ) | ||||
|
|
| |||||||||||||
| y3 | → + : brighter |
|
| y2 |
|
|
|
|
|
| ||||
|
|
|
|
|
| b:( x2,y2 ) |
|
| |||||||
|
|
|
| Y |
| y1 |
|
|
|
|
|
| |||
• At X, input the location of a point on the curve to be moved to Y direction. |
|
| a:( x1,y1 ) |
|
|
| |||||||||
|
|
|
|
|
|
|
|
|
|
| |||||
• At Y, input the amount of move. |
|
|
|
|
|
|
|
|
|
|
|
| |||
| darker |
|
|
|
|
|
| lighter | |||||||
|
| x1 cordinate x2cordinate x3cordinate |
|
|
| ||||||||||
• All the gamma characteristic changes by moving the “y” on a, b or c point. |
| range | X range range |
|
|
| |||||||||
x: cordinates of the x1value, y: changed value y1
• The setting area of the points (a, b and c ) is limited.
Select the item to be changed by LEFT or RIGHT shift button.
a:( , ) ← → b : ( , ) ← → c : ( , ) Change the value by UP or DOWN shift button. e.g.
1b (x 2 value, y 2 changing value )..... Change the y value of all of the image.
2Change the value of a and c.
a : x1=64 y1=0 b : x2=128 y2=0 c : x3=192 y3=0 is the initial setting of “GRAD:ECHO”.
63
