85
9. Troubleshooting
Other messages
MECHA INITIALIZE REQUEST
MECHA INITIALIZE
PRINT STOP
Indicated when the power is turned on after turning off during printing.
Press the MEMORY button for more than one second while pressing
the MONITOR button. *Note : 3
Indicated during initializing.
In the case of pressing the STOP button on the remote control during
printing, this unit is initialized. This message is indicated during initializing.
*Note : 3 This is an operation for initialization. Make sure to press the MONITOR button first. If the MEMORY
button is pressed first, a new image will be stored in memory erasing any previously stored image.
1 Overcoming paper jams
,Roll up the print paper completely.
1Press the OPEN button to pull out the printing unit.
2Remove the ink cassette.
3Turn the knob on the right side of the printing unit clockwise.
4Remove the print paper.
5Cut the defective part of print paper with scissors.
6Cut both edges of the print paper.
7Install the print paper. ( Refer to pages 7 - 8.)