4. Connection with external equipment (Monitor)
Setting the output sync. signal “OUTPUT SYNC”
5Press the DOWN 
or UP 
button to select “OUT SYNC”.
,The set level of the sync. signal, for example, “0.3V” is displayed. Set the sync. signal according to the equipment to be connected.
Press the RIGHT 
or LEFT 
button to select “0.3V” or
“TTL”.
0.3V ......
Setting the output RGB Analog signal “RGB SOG OUT”
6Press the DOWN 
or UP 
button to select “RGB SOG OUT”.
7Press the RIGHT 
or LEFT 
button to select “ON” or “OFF”.
OFF | Outputs Composite Sync. signal |
ON | Outputs Sync. On Green + Composite Sync. signal. |
Select “ON” or “OFF” according to the monitor to be connected.
SET
8Press the SET 
button.
, “CHANGE : OK/CANCEL” is selected.
Press the RIGHT 
or LEFT 
shift button to select “OK” or
“CANCEL” .
SET
9Select “OK” , then press the SET 
button.
,“Memory SW Main Menu” is displayed.
SET
APress the SET 
button.
, “CHANGE : OK” is selected.
SET
BSelect “OK” , then press the SET 
button.
, The source image (input signal from the equipment) is displayed.
0The setting of the sync. polarity and signal is completed.
S i g n a l A d j M e n u
O U T S Y N C : T T L
S i g n a l A d j M e n u
R G B S O G O U T : O F F
S i g n a l A d j M e n u
C H A N G E : O K
M e m o r y S W M a i n M e n u
3 . S I G N A L A D J : P U S H [ > ]
16
