Mitsubishi Electronics CP700E operation manual 1USER Size ADJ, Setting the image size

7. Setting the functions (Main menu)

CONVERT
Function	This function is to output the selected input signal in the “INPUT SEL” function on “2. SIGNAL SET”
	menu to the VIDEO/RGB/S-VIDEO output terminal
	ON	Output the selected input signal to the VIDEO/RGB/S-VIDEO
		output terminal
	OFF	Output the signal from the input terminal to the same names
		as the input terminal .

Note: When the selected signal is remarkably different from the standard signal in timing, the signal

may not be converted correctly at output.

BUZZER

Function Sounds the buzzer

The buzzer sounds when one of the control buttons is pressed, so that the setting can be checked.

ON	Sounds the buzzer
OFF	Does not sound the buzzer
1USER SIZE ADJ	Setting the image size

The printing area can be changed and stored in memory as a user setting.

When selecting “USER ADJ” on the “6.SYSTEM” menu. Press the RIGHT shift button, USER SIZE ADJ menu is displayed.

SET

When pressing the SET button after setting, “CHANGE : OK/CANCEL” is selected.

SET

• When selecting “OK” and pressing the SET button, SYSTEM menu is displayed.

H-POSI

Function Change the horizontal start position of input signal.

Move the image by changing the horizontal position setting area -10 to +10.

When special setting is set to “ON” in Memory SW menu, the setting area of H-POSI is - 65 to +10.

•As the value is decreasing to the minus limit, the switching between memorized image and source image may be impossible during printing.

COPY

Function Copy “SIZE” in the “6.SYSTEM” menu.

Copy an image size set at W, M, N in the “6.SYSTEM” menu.

The selected value is displayed from TOP, BOTTOM, LEFT and RIGHT.

The value is the basis of change.

52