4. Connection with external equipment (RS-232C Interface)
4Connection with RS-232C equipment
,When connecting the unit with another equipment, make sure to set the power of each equipment to “OFF”.
To RS-232C port (RS-232C) 
To
1 
2
VIDEO
AC LINE
|
|
|
| IMPEDANCE |
R | G/G+SYNC | B | RGB | |
IN |
|
|
| 75Ω |
|
|
|
| |
|
|
|
| HIGH |
|
|
|
| SYNC. |
OUT |
|
|
| 75Ω |
|
|
|
| |
|
|
|
| HIGH |
R | G/G+SYNC | B |
|
Equipment with
VCP
Setting BAUD RATE
Set the baud rate of this unit according to the equipment to be connected.
,As to the baud rate of the equipment connected, refer to the operation manual of the equipment connected.
Displaying the menu screen
,The baud rate is set on the menu displayed on the monitor screen or LCD. (The following is an example of display on LCD.)
,Make sure to turn off the power before setting.
Displaying “Memory SW Main Menu”
1Press the POWER button while pressing the MEMORY button on the front panel.
, The menu for memory switch, “Memory SW Main Menu” is displayed.
M e m o r y S W M a i n M e n u 1 . T I M E A D J : P U S H [ > ]
Displaying “System Set Menu”
}Use the buttons on the remote control to display and set this menu.
2Press the DOWN 
button to select “5. SYSTEM SET : PUSH []]”.
3Press the RIGHT 
button.
, | The menu for signal setting, “System Set Menu” is displayed. |
, | Set “BAUD RATE” on this menu. |
M e m o r y S W M a i n M e n u
5 . S Y S T E M S E T : P U S H [ > ]
S y s t e m S e t M e n u
P R G A L L I N I T : O F F
19
