7. Setting the functions (Main menu)
5 COMMENT | Making a comment |
Function Making a comment on print
Refer to pages
6 SYSTEM | System setting 1 |
SIZE
Function Selecting a print area of printing image
Selecting the print size and user print size setting
|
| pr | inting size |
| |
| Picture element |
| (S size) | ( L size) | |
W | 1216 X 600 dot |
| 100 X 75 mm | 130 X 98 mm | |
M | 1148 X 568 dot | 94 | X 70 mm | 123 X 92 mm | |
N | 1104 X 544 dot | 92 | X 69 mm | 120 X 90 mm | |
USER | user can set print size |
|
|
|
|
• The image is not correctly printed depending on printing size.
USER ADJ (User Adjustment )
Function This menu is to display USER SIZE ADJ menu.
Press the RIGHT shift button to display USER SIZE ADJ menu .
“CHANGE : OK/CANCEL” is displayed on the lower position.
SET
When selecting “OK” and pressing SET button, SYSTEM menu is displayed.
Note: When
PAGE INC ( Page Increment)
Function Turn the memory page automatically.
Each time the MEMORY button is pressed, the memory page is turned automatically and the image is
stored in the memory on its page.
ON | This function is available. |
OFF | This function is not available. |
LIVE SEL ( Live Select )
Function | Switching the monitor display of input signal. |
This is a function to select whether the image inputted is displayed as it is or the image adjusted its
image and quality by the unit is displayed.
ANA ( Analog ) | The image inputted is displayed as it is. |
DIG ( Digital ) | The image adjusted its image and quality is displayed. |
Note: • If the characters of character generator is displayed on the monitor screen by setting “DISPLAY” to ON, the source image is displayed even if “ANA” is selected.
•When set to “ANA” , the 75Ω external terminal is necessary. (e.g. monitor etc.) [The 75Ω impedance switch on the rear panel is invalid.]
51