SHIPPING THE PRINTER
To ship your printer long distance, follow steps 1
note: If you are returning the printer for service, you do not need to return the Power Cord, Toner Modules, Belt Cartridge, Fuser Oil Bottle, or Fuser Cleaning Roller.
1.Remove the Fuser Cleaning Roller (A). Make sure the Fuser Oil Bottle is out.
2.Open the Tension Release Tabs and insert the orange Tension Release Pins removed when you originally
AB
unpacked your printer. Insert the Tension Release Pins at each end of the fuser as shown (B).
3.Open the Front Cover and remove the Toner Modules
(C). Do not remove the Belt Cartridge first!
4.Repack the Toner Modules in their original packaging.
5.Flip up the Belt Cartridge Locking Levers (D).
6.Remove the Belt Cartridge (E) and clean according to directions found on page 76.
7.Wrap the Belt Cartridge in its original black wrapper (F).
.
C
MOVING YOUR PRINTER
DE
Avoid exposing the Belt Cartridge to light!
F
Avoid touching the Belt Cartridge!
Shipping the Printer | 105 |
