NEC 4600N manual Alert Message

ALERT Message

Booting…

OUT OF PAPER

TRAY 2 UNSUPPORTED SIZE PAPER MISMATCH LOAD <Paper Size> TRAY

<K, Y, M, or C> TONER EMPTY

<K, Y, M, or C> TONER NOT FOUND PAPER JAM DRUM

PAPER JAM INNER/DRUM

PAPER JAM EXIT/DRUM MISFEED

CHECK WASTE TONER

REPLACE FUSER OIL REPLACE FUSER ROLLER MISPRINT HW FAULT

BELT CARTRIDGE NOT FOUND FUSER UNIT NOT FOUND FUSER ROLLER NOT FOUND FRONT COVER OPEN

BACK COVER OPEN

TOP COVER OPEN LOW FUSER OIL

NEAR END FUSER ROLLER REPLACE BELT REPLACE FUSER UNIT K-TONER LOW

<Y, M, or C> TONER LOW 120K SERVICE

CASSETTE OUT <TRAY 1 or 2>

MEDIA MISMATCH LOAD <MEDIA> TRAY

Explanation

First message to appear when the printer is powered up. One of the paper trays is empty

Paper Tray 2 contains paper size that is not supported by the engine.

Paper Tray 1 or 2 does not have the correct paper size as specified for the print job. Load the paper size shown on the display <Letter, Legal, A4, B5JIS, B5ISO, EXEC, FOLIO, FSCAP, SPFOLI, QUARTO, COM-10, or DL>.

Specified Toner Module is empty. Replace it with a new one.

Specified Toner Module is not installed or installed incorrectly. Reinstall it. Paper jam in Transfer Drum area.

Paper jam in back transfer area. Paper jam in Output Tray.

Paper misfeed from Paper Tray 1 or Paper Tray 2. Waste Toner (Toner Collector) is full or is not installed. Fuser Oil Bottle needs replacing.

Fuser Cleaning Roller needs to be replaced.

Printing error caused by no PRREQ-N within a page. Resend the print job. Belt Cartridge (OPC) is not installed.

Fuser Unit is not installed.

Fuser Cleaning Roller is not installed. Front Cover is open.

Back Cover (containing Transfer Unit) is open. Top Cover is open.

Fuser oil is low. Fuser Unit has about 30 pages of operation remaining. Fuser Cleaning Roller has about 1000 pages of operation remaining. Belt Cartridge worn out.

Fuser Unit reaches end-of-life.

Black Toner Module has less than 300 pages of operation remaining. Specified Toner Module has less than 500 pages of operation remaining. Paper Discharger, Drum Cleaner, Transfer Roller, Transfer Drum, and Paper Pick-up Roller (in back of Paper Trays) all need to be replaced by technician. Paper Tray 1 or 2 is not installed in feeder.

Tray does not have the correct media as specified for the print job. Load the media shown on the display <Paper, Label, or OHT (Transparency/OHP)>.

84 SuperScript 4600N — User’s Guide