REPLACING THE TONER MODULES
Replace each Toner Module when you start seeing print quality problems such as light images or white streaks across the page. The Operator Panel will display the TONER EMPTY message when the toner level is getting low.
To order an NEC SuperScript 4600N Toner Module contact your NEC printer dealer or see below. The black replacement modules print approximately 10,000 pages. The yellow, magenta, and cyan replacement modules print approximately 6,000 pages each.
Follow these directions to replace the Toner Modules;
1.Open the Front Cover (A).
2.Pull out the Toner Module that needs replacing (B).
3.Hold the new Toner Module horizontally and rock it left to right three or four times. Then remove the protective orange cover and tape (C).
4.Insert the Toner Module into its corresponding slot and close the printer (D).
note: The starter Toner Modules that shipped with your printer contain less toner than replacement modules.
To order new Toner Modules ✆
Toner Module | Order # |
|
|
Black Toner Module | |
Yellow Toner Module | |
Magenta Toner Module | |
Cyan Toner Module | |
|
|
A
B
C
D
MAINTAINING YOUR PRINTER
Replacing the Toner Modules | 73 |
