NEC 4600N REPLACING THE FUSER CLEANING R

Replacing the Fuser Cleaning Roller 75
MAINTAINING YOUR PRINTER
REPLACING THE FUSER CLEANING
ROLLER
Order Number 20-211
1. Turn off the printer and allow it to cool (A).
2. Open the Top Cover (B).
3. Open the Lock Tabs (C).
4. Remove the used Fuser Cleaning Roller (D).
5. Install the replacement Fuser Cleaning Roller (E).
6. Close the Lock Tabs and the Top Cover of the printer (F).
7. Reset the Operator Panel to make sure the consumables
usage information is current (G). Follow these steps.
a. Press Online. OFFLINE appears on the display.
b. Press Menu. CONTROL appears on the display.
c. Press Next until USAGE STATUS appears on the
display, and then press Select.
d. Press Next until ROLLER REPLACE? appears on the
display, and then press Select.
e. When the panel displays CONFIRM, press Select
again.
f. Press Menu, then Online.
ABCD
EFG
Power Warning Online
Menu OnLine
Data OHT Label
Feed Item Media
Previous Next Select