UNPACKING

Follow these steps to safely unpack the printer:

1.Open the top cover of the packing box and remove the QuickStart poster.

2.Remove the Accessory kit and Starter kit from the top of the printer.

3.Turn the large plastic box screws at the bottom of the box to the left (A) and pull them out (B).

Unpacking the Printer Box

B

A

D

note: Save the box, box screws, and packing material. If you ship the printer in the future, be sure to follow the special packing instructions in Appendix D to safeguard internal components.

4.Using your thumb and finger, remove the plastic screw sleeves from the box (C).

5.Lift off the outer box (D).

6.Open the plastic bag that contains the printer and slide it down.

7.With one person on each side of the printer, grasp the printer at the hand grips where they are exposed by notches in the foam padding (E).

8.Lift the printer and place it on a sturdy, level surface.

C

E

Caution! The printer and packaging weigh approximately 100lbs.To set up the printer and move it requires two adults.

12 SuperScript 4600N — User’s Guide

Page 20
Image 20
NEC 4600N manual Unpacking the Printer Box