ADDING MEMORY (SIMM)
The SuperScript 4600N have four Single Inline Memory Module (SIMM) slots. The 4600N comes with 96MB RAM. However, you can upgrade your printer to a maximum of 128MB of RAM through the installation of additional SIMMs.
Installing additional memory will help ensure that your printer has enough memory to print the most complex graphic print jobs without sacrificing resolution. Added memory will also increase print speed.
To order SIMMs from NEC call
•72 pin
•32 bit wide configuration (i.e. 8M x 32)
•60 ns
•5v
•
• EDO
•2K refresh
•JEDEC
standard presence detect resistors
Information about name brand compatible DRAM SIMMs can be found at the following NEC Technologies website:
nectech.com/printers/product_info guide
If you want to upgrade your memory from 96MB to 128MB, it is easiest to first remove the two 16MB SIMMs that came with your printer. Then install two 32MB SIMMs in the two memory sockets you removed the 16MB SIMMs from. Your printer now has 128MB of RAM.
To ease installation, remove SIMMs from the bottom memory sockets first. Install SIMMs to the top memory sockets first.
The instructions on the next page explain how to install memory in your printer yourself. You can also contact an
note: If you are installing SIMMs of different capacities you need to use the top two memory sockets marked “A” for the larger capacity SIMMs.
When you turn on your printer it will automatically recognize the added memory. The new memory should show up on the Start Up page shown below. Make sure the printer driver knows about your added memory. See Chapter 4 about changing device settings in your driver.
4600N
S U P E R S C R I P T TM
GENERAL INFO
Printer Name: SuperScript 4600
Software Version: 0.04
Build Time: 936928632
PostScript Version: 3010.108
PrintAgent Version: 1.008
Disk Resource Version: 0.0.4N
STORAGE
RAM Installed: 128 Megabytes
Disk Size: 1964.03 Megabytes
Disk Free: 1667.97 Megabytes
JOB OPTIONS
Number of Copies: 1
Print PS Errors: Enabled
Wait Timeout: 240 seconds
Job Timeout: Never
ENGINE INFO
Default Resolution: 600.0 X 600.0 DPI
Edge Smoothing: Disabled
Jam Recovery: Enabled
Tray 1: Letter
Tray 2: Legal
Pages Printed: 2182
PARALLEL PORT
Status: Enabled
Personality: AutoSelect
NETWORK PORT
Status: Enabled
Personality: AutoSelect
Web Address: http://131.241.45.88
For sales information, call (800)
©1999 NEC Technologies, Inc. All rights reserved. NEC and the NEC logo are registered trademarks and SuperScript is a trademark of NEC Corporation. Adobe, PostScript and the PostScript logo are trademarks of Adobe Systems Incorporated or its subsidiaries and may be registered in certain jurisdictions. All other trademarks and registered trademarks are the property of their respective owners.
PRINTER OPTIONS
Adding Memory (SIMM) | 31 |
