EXTERNAL ZIP DRIVE FEATURE | Connecting the Zip Drive |
An SCSI Iomega Zip® 100MB or Zip® 250MB drive can be connected to the SCSI port of the SuperScript 4600N. The drive must be connected and the Zip cartridge must contain files when the printer is turned on. You can then set up your print job either through the Web or the printer’s Operator Panel. You can print files with the .prn, .ps, .jpg, or .eps extensions.
note: A parallel port Zip drive will not work with this printer.
SuperScript 4600 Interface Panel
Bidirectional Parallel
Perform these steps to connect the Zip drive to your printer.
1.With the printer OFF, connect the Zip drive to the SCSI port on the back Interface Panel of the printer (A).
2.Set the Zip drive terminator to ON.
3.Set the SCSI ID switch to 5.
4.Plug the Zip drive into the power supply, then turn on the printer (B).
5.If you are also connecting a scanner to the printer, see page 69.
A
SCSI Port |
Ethernet |
Caution! Do not plug in the Zip drive when the printer is turned ON.
B
