Nortel Networks Contivity1510D manual Reload

102 Chapter 2 CLI Command Summary

reload in

This command sets a timer that causes the switch to reboot after a certain time has passed. Options can be specified to determine whether the switch turns off or reboots, which configuration to use after a reboot, and other settings.

The user is prompted to confirm that they want to continue with the reload. If they say yes and if the reload command is valid, the system reload will start at the specified time.

Syntax

reload in [hh:]mm [power-offrestart][boot-safeboot-normal][boot-drive {ide0ide1}]

[config-file {latestfactoryconfig-name}][disable-logins][disable-after-restart] [text]

Parameters

[hhmm]	The hours and minutes that must pass before the shutdown will
	start. The allowed range is 00:01 to 24:00.
power-off	If present, the switch will power down after it has completed
	shutdown.
restart	If present, the switch restarts after it has completed shutdown.
boot-safe	If present, switch restarts in safe boot mode.
boot-normal	If present, switch restarts in normal boot mode.
boot-drive	Specify the drive from which the switch will reboot.
ide0ide1	Disk drive from which that bootable image will be loaded.
config-file	Specify which configuration should be used after a reboot.
latest	The switch should be rebooted with the latest configuration file.

311645-A Rev 00