Nortel Networks Contivity1510D manual Host address

Chapter 2 CLI Command Summary 65

host address

This command establishes the IP address, port, bind DN, and bind password settings for the external master and slave LDAP servers. The master server is the primary server to process queries. If the master server becomes unavailable, the switch attempts to use the slave LDAP servers. The switch reattempts connection to the master server every 15 minutes or upon a configuration change. The switch has read/write access to the master LDAP server. The slave servers are read-only.

Syntax

host address {masterslave1slave2} [{portssl-port} [port_number]] [bind-dn bind_dn_value] bind-password bind_password

no host {masterslave1slave2}

Parameters

address	The IP address for the LDAP server. Can be a dotted IP address
	or a host name. The host name does not have to be fully
	qualified if it is in the same domain as the switch.
master	The settings for the master LDAP server
slave1	The settings for the slave 1 LDAP server
slave2	The settings are for the slave 2 LDAP server
port	The port number that connects to the LDAP server
ssl-port	The port number to connect to the LDAP server when using
	SSL. In addition, the SSL encryption settings must be se.
port_number	The port number to connect to on the LDAP server
bind-dn	If present, the distinguished name used to connect to the LDAP
	server

Reference for the Contivity VPN Switch Command Line Interface