
Chapter 2 CLI Command Summary 91
reload
This command forces the switch to reboot immediately. Options can be specified to determine whether the switch turns off or reboots, which configuration to use after a reboot, and other settings.
The user is prompted to confirm that they want to continue with the reload. If they say yes and if the reload command is valid, the system reload commences in approximately 10 seconds.
The Safe and Normal boot modes are used for secure management of the switch. In Normal mode, the switch operates normally. In Safe mode, the HTTP, or FTP traffic is allowed. No other VPN traffic is allowed through the secure management tunnel or the switch.
Syntax
reload
Parameters
If present, the switch powers down after it has completed | |
| shutdown. |
restart | If present, the switch restarts after it has completed shutdown. |
If present, switch restarts in safe boot mode. | |
If present, switch restarts in normal boot mode. | |
Specify the drive from which the switch will reboot. | |
ide0ide1 | Disk drive from which bootable image will be loaded. |
Specify which configuration should be used after a reboot. |
Reference for the Contivity VPN Switch Command Line Interface