Nortel Networks Contivity1510D manual Reload no-sessions, Syntax

106 Chapter 2 CLI Command Summary

reload no-sessions

This command causes the switch to reboot after there are no further logins. The reboot will start after all tunnels into the box, and all management sessions (Telnet, Web, etc.) have been closed. Options can be specified to determine whether the switch turns off or reboots, which configuration to use after a reboot and other settings.

The user is prompted to confirm that they want to continue with the reload. If they say yes and if the reload command is valid, the system reload will start a short time after all sessions (tunnels and administrative) have disconnected.

Syntax

reload no-sessions [power-offrestart][boot-safeboot-safe][boot-drive {ide0ide1}]

[config-file {latestfactoryconfig-name}][disable-logins][disable-after-restart] [text]

Parameters

no-sessions	Indicates the reboot will start once there are no more
	sessions connected to the switch.
power-off	If present, the switch will power down after it has completed
	shutdown.
restart	If present, the switch restarts after it has completed shutdown.
boot-safe	If present, switch restarts in safe boot mode.
boot-normal	If present, switch restarts in normal boot mode.
boot-drive	Specify the drive from which the switch will reboot.
ide0ide1	Disk drive from which the bootable image will be loaded.
config-file	Specify which configuration should be used after a reboot.
latest	The switch should be rebooted with the latest configuration file.

311645-A Rev 00