Nortel Networks Contivity1510D manual Privileged Exec Mode commands

Chapter 1 Introduction 37

Privileged Exec Mode

This command mode is entered from User Exec mode with the enable command. The administrator can exit from this mode with the disable command, they will be returned to User Exec mode.

This is a full display and configuration mode; it enables additional commands to those in User Exec mode. Exec commands are typically one-time commands, for example, show commands and clear commands.

Privileged Exec Mode prompt

CES#

Privileged Exec Mode commands

The following table summarizes the Privileged Exec Mode commands

Table 3 Privileged Exec Mode commands

Command	Description
clear arp-cache	Clear ARP cache
clear logging events	Clear event log
configure	Enter configuration mode
disable	Turn off privileged commands
help	Display message about using help
kill	Terminate a Telnet session
more	Display the contents of a named file
reload	Reboot switch immediately
reload at	Schedule a switch reboot
reload cancel	Cancel pending reboot
reload in	Schedule a switch reboot
reload no-sessions	Schedule switch reboot when no
	more sessions
show arp	Show ARP cache contents
show health	Show overall system health
show logging config	Show configuration log contents

Reference for the Contivity VPN Switch Command Line Interface