Chapter 2 CLI Command Summary 185
trace
The trace command allows the administrator to determine the route that packets use when traveling to their destination. It is commonly used as a diagnostic command (traceroute on most systems).
The trace command does not recognize DNS names with hyphens.
Syntax
trace ip {host address} [hops number] [wait timeout]
Parameters
host | The trace packets to the system identified by this host name. |
address | The trace packets to the system identified by this dotted IP |
| address. |
hops number | Specify the maximum hops. |
wait timeout | Specify the wait timeout in seconds. |
Default |
|
The wait timeout defaults to 5 seconds.
The maximum hops defaults to 30.
Command mode
User Exec
Next command mode
User Exec
Reference for the Contivity VPN Switch Command Line Interface
