Chapter 3 Bulk Load Command 213
The CREATE_ADDRESS command creates a new address definition to be used by a filter rule.
COMMAND: CREATE_ADDRESS
ADDR_NAME: [Address Name - Required]
IP_ADDR: [IP Address - Required]
MASK: [Address mask - Required]
END
The CREATE_PORT command creates a new port definition to be used by a filter rule.
COMMAND: CREATE_PORT
PORT_NAME: [Port Name - Required]
PORT: [Port number - Required]
END
Automatic backup
Two bulk load commands are available to configure the automatic backup feature:
ADD_FTPSERVER
DELETE_FTPSERVER.
Reference for the Contivity VPN Switch Command Line Interface
