Chapter 1 Introduction 35
Table 1 CLI Modes, Prompts and Access
Mode | Prompt | Access |
|
|
|
User Exec Mode | CES> | Login via Telnet with administrator name |
|
| and password. |
|
|
|
Privileged Exec Mode | CES# | Enter the command enable at the User Exec |
|
| Mode prompt. |
|
|
|
Global Config Mode | CES(config)# | Enter the command configure terminal at |
|
| the Privileged Exec Mode prompt. |
|
|
|
User Exec Mode
This is the initial command mode when the administrator first establishes a Telnet connection to the switch. It is also called Exec mode.
This is a limited display mode. You cannot modify configuration parameters or view the configuration file.
User Exec Mode prompt
CES>
User Exec Mode commands
The following table summarizes the User Exec Mode commands.
Table 2 User Exec Mode Commands
Command | Description |
|
|
clear ip route | Remove a route from the route table |
|
|
enable | Enable privileged commands |
|
|
exit | Exit the Telnet session |
|
|
help | Display message about using help |
|
|
ping | Send ping message to a destination |
|
|
show file systems | List available file systems |
|
|
show flash: contents | Display flash settings |
|
|
Reference for the Contivity VPN Switch Command Line Interface
