38 Chapter 1 Introduction
Table 3 Privileged Exec Mode commands
Command | Description |
|
|
show logging events | Show event log contents |
|
|
show logging history | Show the logging history setting |
|
|
show logging security | Show security log contents |
|
|
show logging syslog | Show system log contents |
|
|
Global Configuration Mode
This mode allows the administrator to make changes to the switch running configuration. These changes are saved across reboots. This mode is also used to access other configuration modes (Router, and so on, to be supported in subsequent releases). The administrator enters this mode from Privileged Exec mode using the configure command. To leave this mode and return to Privileged Exec mode, the user enters
Global Configuration Mode prompt
CES(config)#
Global Configuration Mode commands
The following table summarizes the Global Configuration Mode commands.
Table 4 Global Configuration Mode commands
Command | Description |
|
|
arp | Delete ARP cache entries |
|
|
audible alarm | Enable audible alarm |
|
|
console mode | Set administration console mode |
| |
|
|
control | Maintain control tunnel connections |
| |
|
|
default logging history | Set logging history level to default |
| value |
|
|
enable password | Assign privileged level password |
|
|
end | Exit from configure mode |
|
|
