
Chapter 2 CLI Command Summary 45
clear ip route
This command removes a route from the route table. Note that Static Routes are not removed from the switch browser interface by this command. This command is intended as a troubleshooting tool for use when routing problems are being caused by the presence of a wrong route.
Syntax
clear ip route address [mask]
Parameters
address | The address of the network to remove from route table. |
mask | The mask associated with the address to remove. |
Default |
|
The mask defaults to 255.255.255.255.
Command mode
User Exec
Next command mode
User Exec
Warnings
Address not found in route table.
Reference for the Contivity VPN Switch Command Line Interface