94 Chapter 2 CLI Command Summary
Example
CES#reload restart
Reload Scheduled Shutdown
Reload Explanation: Upgrade software
After Shutdown: Restart
Disable New Logins: No
Disable Logins after Restart: Yes
Boot Mode: Normal
Config File: Reset Config File
Boot Drive: /ide0/
Proceed with reload? [confirm]y
This reboots the switch from ide0, using the factory installed defaults and disabling logins after the reboot to allow for system maintenance. Reason is to "Upgrade software." The user must press [CR], or any subset of the string “yes”, to confirm that they want the reload to proceed.
Comments
After a successful reload command, the switch will reboot in approximately 10 seconds. For most Telnet client software, the reboot will cause the Telnet client to close the connection to the switch.
If there are any outstanding reboot commands, they will be canceled. There can only be one reboot scheduled at any time.
