214 Chapter 3 Bulk Load Command
The ADD_FTPSERVER command is used to configure a new automatic backup server.
COMMAND: ADD_FTPSERVER
FTP_IP: [FTP host IP address - Required]
FTP_UID: [User ID for FTP host - Required]
FTP_ENABLE: [Enable
FTP_PSW: [Password for FTP host - Default: "" ]
FTP_INTERVAL: [Time between backups (hours) - Default: 5]
FTP_PATH: [Path where files are stored - Default: \]
FTP_SERVER: [FTP Server {1/2/3} - Default: 1]
END
The DELETE_FTPSERVER command is used to remote an existing automatic backup server.
COMMAND: DELETE_FTPSERVER
FTP_SERVER: [Existing FTP Server {1/2/3} - Required]
END
SYSLOG forwarding
Two bulk load commands are available to configure the syslog forwarding feature:
ADD_SYSLOG
DELETE_SYSLOG
