Nortel Networks Contivity1510D manual If present, this explains the reason for a reload command

		Chapter 2 CLI Command Summary 103
factory	The switch should be rebooted with the reset configuration file.
	This file sets the switch to basic defaults; the contents of the
	LDAP database and other settings are still maintained.
config-name	Name of the previously saved configuration to use on reboot.
disable-logins	No more logins should be permitted before the reboot occurs.
disable-after-restart		Logins should not be permitted after the reboot. This is
		intended to support system maintenance tasks after a
		reboot.
text		If present, this explains the reason for a reload command.
		This reason will be displayed on the Admin->Shutdown
		and Status->System Web management pages.

If the value for the text parameter contains spaces, it may be enclosed in double quotes so that it has a single parameter value.

Default

The default settings for this command are determined by any previous reload command. For the first reload command, the following defaults apply:

restart

boot-drive ide0

config-file latest

Command mode

Privileged Exec

Next command mode

Privileged Exec

Reference for the Contivity VPN Switch Command Line Interface