100 / Troubleshooting
Event messages
Event message display
Evt:275-3546 S8
Cause
(U.S. only) Unable to activate all registered portables. The system ran out of portable credits. One event is generated per portable that failed to activate. The repetition of the corresponding alarm code 59 indicates how many additional credits must be purchased.
|
|
| The Base Station (on port 0103 in this case) cannot |
|
| S5 | |
|
|
| successfully receive the data image. |
|
|
| Both radios belonging to the Base Station are |
|
|
| |
|
|
| disabled. This may occur if the flash EEPROM is |
|
|
| faulty. Two events are raised: one for the B1 |
|
|
| channel radio (as in this case) and another for the |
|
|
| B2 channel radio. A corresponding alarm code 53 |
|
|
| occurs. |
|
|
| The Base Station (on port 0103 in this case) cannot |
| S5 | ||
|
|
| be written to during data transfer. |
|
|
| Both radios belonging to the Base Station are |
|
|
| |
|
|
| disabled. The Base Station’s flash EEPROM is |
|
|
| faulty. Two events are raised: one for the B1 |
|
|
| channel radio (as in this case) and another for the |
|
|
| B2 channel radio. A corresponding alarm code 53 |
|
|
| occurs. |
|
|
| The Base Station (on port 0103 in this case) cannot |
|
| 5 | |
|
|
| be synchronized with the other Base Stations in the |
|
|
| system. |
|
|
| |
|
|
| Both radios belonging to the Base Station are |
|
|
| disabled. The Base Station hardware is faulty. Two |
|
|
| events are raised: one for the B1 channel radio (as |
|
|
| in this case) and another for the B2 channel radio. |
|
|
| A corresponding alarm code 53 occurs. |
|
|
| A B2 channel radio (radio 2 on port 0103 in this |
|
|
| case) cannot be synchronized with other radios |
because of system overload.
P0881594 Issue 01 |
