Nortel Networks MICS-XC manual Norstar features, Entering programming using other passwords

58 / Programming

By using a special password, a system coordinator can see and change many, but not all, of the programming settings used by an installer. In this guide, programming that can be changed only by an installer is marked in the heading. If you are programming using the System Coordinator Plus password, you do not see these items when you move through programming.

1.Press ƒ••¤flfl‹››which is the same as ƒ••Ç؈ÏÈÌ. The display shows Password:.

2.Enter the System Coordinator Plus password. The default password is SCPLUS (727587). The display shows Terminals&Sets. Three triangular indicators ºappear on the vertical display between the rows of buttons.

3.Place the programming overlay over the buttons pointed to by the indicators º.

Entering programming using other passwords

A set of the most often used headings and subheadings is available by using a System Coordinator password. This level of access is designed for the average user who takes care of the day-to-day changes to the Norstar system, but who does not need to use more advanced programming. The default password is ADMIN (23646).

Norstar features

Refer to MICS-XC Norstar Companion System Coordinator Guide for a complete list of features supported on Companion portables.

Portable features

Refer to the Portable Telephone User Guide that is supplied with your portable.

MICS-XC Norstar-Companion Installer Guide P0881594 Issue 01