Nortel Networks MICS-XC manual Evt308-0103

Troubleshooting / 101

Event message display

Evt:305-01032 S5

Evt:306-01031 S5

Evt:307-0109100 S5

Cause

A B2 channel radio (radio 2 on port 0103 in this case) cannot be synchronized because the B1 radio was disabled in maintenance.

Both radios belonging to the Base Station (on port 0103 in this case) are disabled. The B1 radio must be operational to synchronize both radios of the Base Station with other radios in the system. Two events are raised: one for the B1 channel radio and another for the B2 channel radio. A corresponding alarm code 53 occurs.

A radio (0103-1 in this case) cannot be synchronized because there are no B2 channel radios.

Both radios belonging to the Base Station (on port 0103 in this case) are disabled.Two events are raised: one for the B1 channel radio in this case) and another for the B2 channel radio. A corresponding alarm code 53 occurs.

A recoverable RIM fault has occurred

The RIM is reset. If a link is active when this error occurs, the link is dropped. The radio (0109-1 in this case) is returned to service.

		An unrecoverable RIM fault has occurred
Evt:307-0109101	S5
		The radio (0109-1 in this case) is disabled and
		taken out of service. If a link is active when this error
		occurs, the link is dropped. A corresponding alarm
		code 53 occurs.
		The built-in self-test on the Base Station has failed
Evt:307-0109102	S5
		The radio (0109-1 in this case) is disabled and
		taken out of service. If a link is active when this error
		occurs, the link is dropped. A corresponding alarm
		code 53 occurs.
		The Base Station is connected to a system that
Evt:308-0103	S5
		supports a radio protocol that the ICS does not
		understand.
		There is a bad signature.
Evt:664	S8

P0881594 Issue 01 MICS-XC Norstar-Companion Installer Guide