Nortel Networks MICS-XC manual Entering programming for installers

Programming / 57

Companion programming falls under System prgrming and has the following subheadings:

Registration	lets you enable and disable registration and
	verify which portable DNs are available
Radio data	lets you view and change cell and radio
	settings

For other programming operations refer to Modular ICS Installer Guide.

Entering programming for installers

1.Press ƒ••¤flfl‹››which is the same as ƒ••Ç؈ÏÈÌ. The display shows Password:.

2.Enter the Installer password. The default password is CONFIG (266344). The display shows Terminals&Sets. Three triangular indicators ºappear on the vertical display between the rows of buttons.

3.Place the programming overlay over the buttons pointed to by the indicators º.

Entering programming for system coordinators

The person on staff who is in charge of making changes on the Norstar system is called the system coordinator. The everyday Companion programming done by system coordinators is described in MICS-XCNorstar-Companion System Coordinator Guide.

Some system coordinators need to be able to program more advanced settings and functions in order to carry out the day- to-day requests and upkeep of the Norstar system. These coordinators are usually dedicated communications specialists who work with large Norstar systems or other telephone systems like PBX or Centrex.

P0881594 Issue 01 MICS-XC Norstar-Companion Installer Guide