Nortel Networks MICS-XC manual Installing Base Stations

			Installation / 31
Pin	RPI Connector Board	Label	Wire color
41		-PWR	Yellow-Blue
16	OBIX14		Blue-Yellow
	BS14
42		TCM	Yellow-Orange
17			Orange-Yellow
43		+PWR	Yellow-Green
18			Green-Yellow
44		-PWR	Yellow-Brown
19	OBIX15		Brown-Yellow
	BS15
45		TCM	Yellow-Slate
20			Slate-Yellow
46		+PWR	Violet-Blue
21			Blue-Violet
47		-PWR	Violet-Orange
22	OBIX16		Orange-Violet
	BS16
48		TCM	Violet-Green
23			Green-Violet
49		+PWR	Violet-Brown
24			Brown-Violet
50
25

Installing Base Stations

Before installing wireless equipment, ensure that a site planner has determined Base Station locations and recorded them in the Provisioning Record.

Each Base Station must be installed within 1230 m (4000 ft., TCM wiring length) of the ICS or Base Station Module.

To optimize seamless hand-off, the difference in TCM wiring length between neighboring Base Stations should not exceed 300 m (1,000 ft.).

P0881594 Issue 01 MICS-XC Norstar-Companion Installer Guide