80 / Registering individual portables
If the display does not show Office n: Free., follow the procedures in “Deregistering the C3020 (Canada only)’’ on page 81 to overwrite the system number then return to step 2 of this procedure.
4.Press s, then press m. The display shows
Registering....
5.Next, enter the Registration password when the display shows Pswd:. The default is 72346
(RADIO).
If the display does not clear after entering the password, then you may be using the wrong password.
6.Wait for the display to clear. When it shows DN:, enter the internal number
Reg'n complete.
7.On the administration set, turn off registration in general programming, Companion, subheading Registration. See “Companion programming” on page 61.
To confirm that the C3020 is registered
1.To check that the portable has a dial tone, press L. If you hear a dial tone, go to step 2.
If you do not hear a dial tone, check that you have selected the correct system number and press Lagain. If you no not hear dial tone try to register the portable again.
2.Make sure that the flap is closed and the Ringer Control Switch is in the bottom position. Make sure the portable telephone is idle and call forward is not active.
3.On a working telephone, dial the telephone number of the registered portable.
P0881594 Issue 01 |
