Programming
Programming is performed by the installer or the customer service representative, and it allows you to change settings for the entire Norstar system, plus settings for individual telephones and external lines. Most of the settings can also be programmed by a system coordinator who has a “plus” (SysCoord+) password. This password is distributed only by the installer to avoid system complications.
Programming affects system operation.
Only a qualified installer or customer service representative should perform startup, installation and maintenance programming. Some of the settings affect the correct operation of the system.
Programming overview
Programming access is controlled by four passwords.
Installer password
Allows you to see and change any item in programming.
System Coordinator Plus password
Provides knowledgeable users with access to all but a few sensitive areas of programming. It is usually distributed by installers to System Coordinators that require special programming access.
System Coordinator password
Used to view and change the settings that are part of
P0881594 Issue 01 |
