![](/images/new-backgrounds/1277245/27724563x1.webp)
26 / Installation
Output connections
Feed the output pairs in through the bottom of the RPI and route the pairs to the output connectors as shown in the following illustration. If only one pair is used for powering a Base Station, connect the power pair to
Ensure both pairs have the same polarity.
Connecting two power pairs with opposing polarities may damage the Base Station and RPI.
Output connector pinout
OBIXn
TCM
TCM
+PWR(2)
+PWR(1)
Input connections
Feed the TCM input pairs from the ICS distribution frame through the top of the RPI and route the pairs to the input connectors (IBIX1 to IBIX4) as shown in the following illustration. There may be fewer than 16 input pairs in any given RPI installation.
P0881594 Issue 01 |