Nortel Networks NN44200-313 quick start Checking the current IP address of the PBX LD, Step Action

14CS 1000/M1 system status check

•"Checking the status of the ELAN connection to the PBX (LD 48)" (page 15)

Checking the current IP address of the PBX (LD 117)

Perform the following procedure to check the current IP address in the CS 1000 or M1 system.

Step Action

1Connect to the PBX.

2If you have not already done so, log on using the proper account with the following syntax:

logi <login name>

3Press Enter.

4At the prompt, type the password for the login name and press Enter.

5Enter LD 117.

6Enter STAT HOST to display the IP addresses and host names configured in the CS 1000 or M1 system.

Note: If there is no IP provisioning completed, see the CS 1000 System and CallPilot Server Configuration guide (NN44200-312) for advanced provisioning. When provisioning is complete, return to this guide and continue to the next procedure.

7To exit the overlay, enter ****.

—End—

Checking the currently configured VAS IDs

Step Action

1Connect to the PBX.

2Enter LD 22.

3At the REQ prompt, enter PRT.

4At the TYPE prompt, enter VAS.

5If there are some VAS IDs provisioned, take note of the VAS ID information. If there are no VAS IDs provisioned, this guide explains the steps to provision them in the next chapter.

Nortel CallPilot

Quickstart Guide

NN44200-313 01.02 Standard

5.019 May 2008

Copyright © 2007-2008, Nortel Networks