Nortel Networks NN44200-313 quick start

Defining CallPilot in the customer data block (LD 15) 21

4Enter the appropriate values as described in the following table to define Call Redirection. For prompts not listed in the following table, press Enter to accept the default.

Table 6

LD 15 - Configuring Call Redirection

Prompt	Response	Notes
REQ	CHG
TYPE	rdr
CUST	xx	Customer number for CallPilot.
FNAD	xxxx	Enter the FDN for CallPilot.
FNAT	xxxx	Enter the FDN for CallPilot.
FNAL	xxxx	Enter the FDN for CallPilot.
CFNA	4
CFN0	1-(4)-15	Number of normal ringing cycles
		for CFNA, Option 0.
CFN1	1-(4)-15	Number of normal ringing cycles
		for CFNA, Option 1.
CFN2	1-(4)-15	Number of normal ringing cycles
		for CFNA, Option 2.

5Enter the appropriate values as described in the following table to define End-to-End Signaling Tone. For prompts not listed in the following table, press Enter to accept the default.

Table 7

LD 15 - Configuring End-to-End Signaling Tone

Prompt	Response	Notes
REQ	CHG
TYPE	ftr
CUST	xx	Customer number for CallPilot.
EEST	YES	Enter NO if remote sites are set
	NO	to NO.

6Enter the appropriate values as described in the following table to define Integrated Services Digital Network. For prompts not listed in the following table, press Enter to accept the default.

Nortel CallPilot

Quickstart Guide

NN44200-313 01.02 Standard

5.019 May 2008

Copyright © 2007-2008, Nortel Networks