Nortel Networks NN44200-313 Configuring the Route Data Block LD, Step Action, Prompt, Response

22CallPilot resource configuration

Table 8

LD 15 - Configuring Integrated Services Digital Network

Prompt	Response	Notes
REQ	CHG
TYPE	net
CUST	xx	Customer number for CallPilot.
ISDN	YES	Enter NO if NMS is not installed
	NO	on the CS 1000 or M1 system.
PNI	xxxxx	Private Network Identifier.
		Within one network, use the
		same PNI value in LDs 15 and
		16. When you interwork with
		different networks, enter the
		PNI of this CS 1000 or M1
		system in LD 15, and the PNI of
		the target or remote CS 1000 or
		M1 system in LD 16.
		The default PNI = 0 prevents
		the operations of features such
		as NRAG, NACD and NMS.
HLOC	xxxx	Home Location Code defined in
		LD 90.
LSC	xxxx	Local Steering Code defined in
		LD 15.

7To exit the overlay, enter ****.

Tech tip: To view a list of installed packages, enter LD 22 and enter PRT at the REQ prompt, then PKG. Use the capture text function in hyperterminal to save a text file of the output.

—End—

Configuring the Route Data Block (LD 16)

Perform the following procedure to configure the Route Data Block.

Step Action

1Connect to the PBX.

2Enter LD 16.

Nortel CallPilot

Quickstart Guide

NN44200-313 01.02 Standard

5.019 May 2008

Copyright © 2007-2008, Nortel Networks